Termékek ss tube mill (30)

Ons assortiment telt 15 000 artikelen, waaronder: RVS buizen 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Rondstaven van roestvrij staal 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 - Gelaste en niet gelaste buizen van roestvrij staal 904L 1.4539 UB6 - Massieve rondstaven van roestvrij staal UB6 904L 1.4539 - Vuurvaste buis en rondstaf 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex buizen UNS S31803 1.4462 - Super duplexbuizen UNS S32750 S32760 1.4410 1.4501- Massieve duplex- en super duplexrondstaven 1.4462 1.4410 1.4501 - Roestvrij plaatstaal 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Vuurvaste plaat 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplexplaten UNS S31803 1.4462 - Super duplexplaten UNS S32750 S32760 1.4410 1.4501- Platen van roestvrij staal UB6 904L 1.4539 - Buizen van legeringen 600; 601; 800; 825 - Hastelloy C276 - Buizen en platen 2.4816; 2.4851; 2.4856; 2.4360 - Flenzen van roestvrij staal duplex super duplex 904L UB6 1.4539

Tubes Titane

Corrimano in allumino in barre da 3 metri

21Cr-6Ni-9Mn is a high manganese nitrogen strengthened, austenitic stainless steel. It combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures as well as good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as type 304 and 316, and is readily wieldable. It remains nonmagnetic after severe cold work. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:14 W/m/°K Thermal Expansion:16.7 μm/μm/°C Modulus Elasticity:19.6 Gpa Electrical Resistivity:73 μohm/cm Density:7.83 g/cm3

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 5 m Référence:0650.0500.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:5 mètres Section:Rond

Konstruktionsrohre, Stahl / Aluminium / Edelstahl, für Rohr-Klemmverbinder Ausführung in Stahl ST verzinkt, blau passiviert ZB Ausführung in Aluminium AL • blank, unbehandelt BL • eloxiert, naturfarben EL Ausführung Edelstahl nichtrostend, 1.4301 NI blank, unbehandelt BL Sägeschnittfläche entgratet blank, d.h. nicht oberflächenbehandelt Artikelnummer:GN 990-AL-V12-100-BL Gewicht:12 d1:- d2:9 l ±0.5:* s1:V 12 s2:9 w1:1.5 w2:1.5

Weltweit einzigartig ist bei der Schierle Stahlrohre GmbH & Co. KG die Möglichkeit der Kombination aus dem Bezug von Stahlrohren und -stangen als Handelsware sowie von maßgeschneiderten Komponenten auf Kundenwunsch und nach Zeichnung für die verschiedensten Anwendungen. Das Produkt "Alu - Pneumatikrohre (PNA)" weißt die folgenden Spezifikationen auf: Werkstoff: Al Mg Si 0,5 Toleranz ID: H11 Rauigkeit: Ra max. 1,0 μm Oberfläche: harteloxiert 25 + / - 5 μm Herstellungslängen: 2,0 – 4,0 m Kompetenz in der Qualitätssicherung. Die Schierle Stahlrohre GmbH & Co. KG verfügt seit 1994 über ein Qualitätsmanagementsystem, das die Norm DIN EN ISO 9001:2008 erfüllt. Alle Mitarbeiter des Unternehmens sind so geschult, dass die Anforderungen dieses QM Systems jederzeit erfüllt und weitere Verbesserungen eingebracht werden.

AMETEK Specialty Metal Products bietet eine breite Auswahl an Präzisionsrohren, die von seinen Tochterunternehmen Fine Tubes in Großbritannien und Superior Tube in den USA gefertigt werden.

Available in a variety of sizes for HVAC, industrial, and condenser applications Our aluminum round tubes can be designed for many industrial and commercial uses, but are ideal for heat transfer applications where weight and space are design concerns, including in HVAC units, manifolds, evaporators, and condensers. Other applications include electrical conduits and general tubing for plumbing and construction. • Available in a variety of sizes for HVAC, industrial, and condenser applications • A wide array of aluminum alloys available • High-strength materials available for high-pressure applications • Internally scarfed round tube

Universal solution when different hose diameters have to be welded together. These step connectors are mostly used for accessory exhaust systems with larger diameters.

Cranked Steel Extension Tubes 1/8” BSP Male both ends Part No. BRT6

Frameless Shower Hardware Shower Stabilizers

- Mit nur einer angebauten Metallbalgkupplung - Hoher Versatzausgleich - Beste Torsionssteifigkeit Ausgestattet mit nur einer angebauten Metallbalgkupplung. Versatzausgleich der zu verbindenden Wellenenden und beste Torsionssteifigkeiten.

Material: Normal Stahl material: normal steel Oberfläche: Hitzebeständig lackiert surface: heat protecting painted Dämpfung: Bis zu 25 dB(A) redcution: 25 dB(A) Prinzip: Kombinationsprinzip principle: combination principle Temperatur: 650°C temperature: 650°C Motortyp: Universell engine type: universal Dämpfung: Bis zu 25 dB(A) reduction: 25 dB(A) Frequenz in Hz Mit Geschwindigkeiten zwischen 30-80 m/sec. frequency in hz with speeds between 30-80 m/sec. Druckabfall (mm. H2O) Mit Basistemperatur von 480°C Pressure drop (mm. H2O) with basis temperature 480°C Artikelnummer / Article number:18134 HP:1260-1632 KG (+-7 5%):* KW:926-1200

Tube en inox 304 pour l'intérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 2 m Référence:0650.0200.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:1 mètre Section:Rond

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 1 m. Ce tube inox est a utiliser en extérieur, pour fabriquer un poteau ou une main courante. Référence:0650.0100.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:1 mètre Section:Rond

Tube en inox 304 diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 5 m Référence:0650.0500.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:5 mètres Section:Rond

Tube en inox 304 diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 4 m Référence:0650.0400.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:4 mètres Section:Rond

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 4 m Référence:0650.0400.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:4 mètres Section:Rond

Alloys 304 (S30400) and 304L (S30403) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. High strength, excellent corrosion resistance and minimized carbon content make Alloy 304 and 304L Stainless Steels useful for applications where welding is required. Uses include architectural mouldings and trim, welded components of chemical, textile, paper, pharmaceutical and chemical industry processing equipment. Other advantages are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. For severely corrosive environments,the lower content of Type 304L is preferred because of its greater immunity to intergranular corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:16.2 W/m/°K Thermal Expansion:17.2 μm/μm/°C Modulus Elasticity:19.3 Gpa Electrical Resistivity:7.23 μohm/cm Density:8.0 g/cm3

Tube en inox 304 diamètre 48,3 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 3 m Référence:0660.0300.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:3 mètres Section:Rond

UNS NO8904, commonly known as 904L, is a low carbon high alloy austenitic stainless steel which is widely used in applications where the corrosion properties of AISI 316L and AISI 317L are not adequate. The addition of copper to this grade gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. However, there is limited use with hydrochloric acids. It also has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Alloy 904L performs better than other austenitic stainless steels due to the higher alloying of nickel and molybdenum. The grade is non-magnetic in all conditions and has excellent formability and weldability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):450 J/kg/°K Thermal conductivity:11.5 W/m/°K Thermal Expansion:15.8 μm/μm/°C Modulus Elasticity:190 Gpa Electrical Resistivity:9.52 μohm/cm Density:7.95 g/cm3

Superior Tube Co. supplies above industry standard quality high performance used in the manufacturing of liquid and gas chromatography. High Performance Liquid Chromatography High performance liquid chromatography (HPLC) is used to analyze chemicals in both research and industrial processing. It’s an application that requires precision tubing, which is resistant to high temperatures, pressures and corrosion. For many years, Superior Tube has supplied tubes made from corrosion resistant austenitic, stainless steel and nickel alloys for a range of HPLC equipment. The tubing is used for the manufacturing of the columns in chromatography machines. This application requires exceptional inside diameter condition and overall tube strength to withstand the pressure involved when pumping liquids or gases through the column in order to extract samples for chemical analysis. Please note that we have a minimum order value of £10,000.

Alloy 209 is a fully austenitic nitrogen strengthened stainless steel, having twice the yield strength and superior corrosion resistance at room temperature when compared to 316/316L or 317/317L stainless steels. This grade does not become magnetic when cooled to sub-zero temperatures or to a cold working process and has high resistance to sulphide stress corrosion cracking in both annealed and cold worked/ cold worked & aged form up to 30 HRc hardness. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):134 J/kg/°K Thermal conductivity:15.6 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:199 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3

The high precision seamless tubes manufactured at Fine Tubes begin their journey as seamless tube extrusions, in a range of different sizes. This material is reduced in size several times until it gradually reaches the exact specifications our customers require. Each time we perform a reduction process, the tube needs to be cut, cleaned and heat treated before the next one can commence. Please note that we have a minimum order value of £10,000.

Stainless steel grades cover a wide range of compositions which result in the generation of a variety of microstructures and mechanical properties. This group of alloys is useful for the replacement of mild steel in structures and components. Stainless Steel tubes manufactured by Fine Tubes have an excellent combination of corrosion resistance, metallurgical stability and formabilityStainless steels are favoured because they are very cost effective. They also have an excellent combination of corrosion resistance, metallurgical stability, formability, and are easily welded. Their fabrication characteristics, good mechanical properties and attractive finished appearance make high quality stainless steel tubing a popular choice in a range of industries. Please note that we have a minimum order value of £10,000.

Ti 3AI/2.5V (Titanium Grade 9) alloy is a near alpha, alpha-beta alloy, sometimes referred to as “half-6-4.” It offers 20 to 50% higher tensile strength than the commercially pure titanium at room and elevated temperatures. It is much more amenable to cold working than Ti 6AI/4V alloy and can be cold worked 75 to 85% to result in moderately high strength and good ductility. Furthermore, it is weldable as the commercially pure grades and has excellent resistance to torsion and corrosion.Ti 6Al/4V is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti. Amongst its many advantages, it is heat treatable. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):427 J/kg/°K Thermal conductivity:7.6 W/m/°K Thermal Expansion:7.9 μm/μm/°C Modulus Elasticity:107 Gpa Electrical Resistivity:12.6 μohm/cm Density:4.48 g/cm3

S20910 stainless steel provides a combination of good corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by types 316 and 316L, plus approximately twice the yield strength at room temperature in the annealed condition. In addition S20910 stainless steel has very good mechanical properties at both elevated and sub-zero temperatures a well as outstanding cryogenic properties. And, unlike many austenitic stainless steels, 22-13-5 stainless steel can be heavily cold worked to enhance its yield strength and remain non-magnetic. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):475 J/kg/°K Thermal conductivity:13.3 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3

Alloy 22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Alloy 22 has resistance to oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic. This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi-purpose plants where such “upset” conditions occur frequently. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):414 J/kg/°K Thermal conductivity:10.2 W/m/°K Thermal Expansion:6.9 μm/μm/°C Modulus Elasticity:206 Gpa Electrical Resistivity:4.48 μohm/cm Density:8.69 g/cm3

Straight Steel Extension Tubes 1/8” BSP Male both ends SRT6 Straight Steel Tube :6” (150mm)